+7 (812) 595-35-00
Отправить запрос
Обратный клапан дросселя Z2FS 10

Дросселирующие распределители Z2FS 10

Технические характеристики

  • Size 10
  • Component series 3X
  • Maximum operating pressure 315 bar
  • Maximum flow 160 l/min
  • Sandwich plate valve
  • Porting pattern according to ISO 4401-05-04-0-05, NFPA T3.5.1 R2 and ANSI B93-7 D05
  • For the main or pilot flow limitation of 2 actuator ports.
  • 3 adjustment types:

    • Lockable rotary knob with scale• Spindle with internal hexagon and scale• Rotary knob with scale

  • Meter-in or meter-out throttling
  • Corrosion-protected design

general

Size

10

Weight (approx.)

kg

3.1

Installation position

any

Ambient temperature range

NBR seals

°C

-30 … +80

FKM seals

°C

-20 … +80


hydraulic

Size

10

Maximum operating pressure

bar

315

Maximum flow

l/min

160

Hydraulic fluid

see table

Hydraulic fluid temperature range

NBR seals

°C

-30 … +80

FKM seals

°C

-20 … +80

Viscosity range

mm²/s

10 … 800

Maximum admissible degree of contamination of the hydraulic fluid 1)

Class 20/18/15 according to ISO 4406 (c)

1) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter.

Hydraulic fluid

Classification

Suitable sealing materials

Standards

Data sheet

Mineral oil

HL, HLP

FKM, NBR

DIN 51524

90220

Bio-degradable

1)​

Insoluble in water

HETG

FKM

ISO 15380

90221

HEES

FKM

Soluble in water

HEPG

FKM

ISO 15380

Flame-resistant

Water-free

HFDU (glycol base)

FKM

ISO 12922

90222

HFDU (ester base)

1)

FKM

Containing water

HFC (Fuchs Hydrotherm 46M, Petrofer Ultra Safe 620)

NBR

ISO 12922

90223

Important information on hydraulic fluids:

For further information and data on the use of other hydraulic fluids, please refer to the data sheets above or contact us.
There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.).
The ignition temperature of the hydraulic fluid used must be 50 K higher than the maximum surface temperature.
Flame-resistant – containing water:
Maximum pressure differential 210 bar, otherwise, increased cavitation erosion
Life cycle as compared to operation with mineral oil HL, HLP 30 … 100%
Maximum hydraulic fluid temperature 60 °C
Bio-degradable and flame-resistant: If this hydraulic fluid is used, small amounts of dissolved zinc may get into the hydraulic system.

1) Not recommended for corrosion-protected version “J3” (contains zinc)

For applications outside these parameters, please consult us!

Заказной код

Артикул Наименование
R987454587 WSH1P031342 Z2FS 10-5-3X=J3 SP03-0188
R900989094 Z2FS 10-3-3X/
R900523737 Z2FS 10-3-3X/V
R983032448 Z2FS 10-3-3X/V IN010
R900989095 Z2FS 10-5-3X/
R900517812 Z2FS 10-5-3X/V
R987448392 Z2FS 10-5-3X/V — SO026-799
R900051691 Z2FS 10-5-3X/V=LB
R901427672 Z2FS 10-5-3X=J3
R900989096 Z2FS 10-7-3X/
R900523926 Z2FS 10-7-3X/V
R900989098 Z2FS 10A3-3X/S2
R900569858 Z2FS 10A3-3X/S2V
R900524995 Z2FS 10A3-3X/SV
R900989099 Z2FS 10A5-3X/S
R900571890 Z2FS 10A5-3X/S2
R900523578 Z2FS 10A5-3X/S2V
R900517813 Z2FS 10A5-3X/SV
R900989101 Z2FS 10A7-3X/S
R900989102 Z2FS 10A7-3X/S2
R900032241 Z2FS 10A7-3X/S2V
R900526683 Z2FS 10A7-3X/SV
R900989103 Z2FS 10B3-3X/S
R900071261 Z2FS 10B3-3X/S2V
R900057401 Z2FS 10B3-3X/SV
R900989105 Z2FS 10B5-3X/S
R900989106 Z2FS 10B5-3X/S2
R900517814 Z2FS 10B5-3X/S2V
R900520680 Z2FS 10B5-3X/SV
R900033142 Z2FS 10B7-3X/S2V
R900562269 Z2FS 10B7-3X/SV
R983032447 Z2FS10 7-3X/V IN010
R983032443 Z2FS10 B5-3X/SV IN010
R983032449 Z2FS10-5-3X IN010
R983032442 Z2FS10-5-3X/V IN010
R983032445 Z2FS10-A5-3X/S2V IN010
R983040208 Z2FS10-A5-3X/SV IN010
R983032446 Z2FS10-B5-3X/S2V IN010
R900564522 Z2FSK10-2-1X/2QV